Spill Switch
Spillage Switch is designed to trip and shutdown the conveyor system when a predetermined amount of spillage is present to activate the switch (pressure plate). This helps to eliminate
buried head and tail pieces of the conveyor belt. Typical applications would include all bins, hoppers, belt heads, and tail pieces and anywhere spillage is a problem. Face hinged pressure plate toward belt (coal). Wire to the normally open contacts of switch and the pre-determined digital input of the controller (if applicable).
Specification Sheet
Physical- |
| Size | Enclosure: 13”W x 13”H x 4”D (3”D when activated) Overall: 13”W x 14.5”H x 4”D | | |
| Weight | 13 pounds (5.9 kg) | | |
| Construction | Painted steel enclosure Hinged pressure plate | | |
| Hardware | Coated Steel | | |
| Terminals | (3) Common, Normally Open, Normally Closed | | |
| Cable access | (1) 1” hole, with cord grip | | |
Electrical- |
| Contact voltage | 600VAC max. | | | |
| Contact Current | Maximum 4 Amp | | | |
Environmental effects- |
| Temperature | 0-46C (32-110F) | | |
| Humidity | 5-95% non-condensing | | |
| Altitude/pressure | None | | |
Warranty 1-year | | | | Rev. 180615 |
Distributed by
|